1.Electric sightseeing car as a non-highway vehicle, please do not drive on the highway.

2. Please load according to the vehicle design, overloading is strictly prohibited, so as not to cause damage to the motor, controller, contactor and other electronic components.

3. Before driving, pre-check the set voltage reading, brake and direction system are normal.

4. Before starting, place the forward/reverse switch in neutral, then turn on the key switch, select the direction selector switch, release the parking brake, and step on the accelerator pedal smoothly (it is forbidden to step on the accelerator pedal quickly), and the car will be ready to drive.

5. Before driving the parking brake must be put to the end, it is strictly prohibited to drive with parking, so as not to damage the brake pads, motor and controller.

6. It is strictly prohibited to step on the accelerator pedal violently and frequently, so as not to cause damage to the gas pedal and controller.

7. When leaving or parking the car, you should switch the forward/reverse switch (gear) to the center shift position and pull out the key.

8. Check the battery electrolyte once a week (the standard liquid level is 10-15mm higher than the battery plate), it is strictly prohibited to add other liquids, and must be filled with evaporated water. (such as lead-acid maintenance-free batteries are not required)

9. Battery should always check whether the connection line is broken, whether the plate column is loose, there is no mold, etc., such as the connection line must be removed, unscrew the pole nut, with a copper wire brush clean with a dry cloth, and then coated with petroleum jelly, rust oil, otherwise it will cause the whole car circuit failure.

10. Controller, gas pedal, brake, instrument panel, DC converter, CD player, charger is strictly prohibited water.

11. Vehicles parked for a long time or use too little frequency, shall be placed after full power, every 15 days must charge the battery maintenance and maintenance to ensure that the whole car moving power supply to provide normal.

12. The use of the operation process when it is strongly recommended that the regular maintenance of the brake. (Specific time according to the frequency of use).

13. Safe driving, do not drive after drinking, do not drive at high speed when going uphill, turn should be slowed down to avoid safety accidents.